Bag 2.0
A shoulder bag designed with the curved shape a stuffed bag takes on anyway. Thanks to the design process, all panels fit each other. The sewing was still annoying, because there are very few straight seams.
For designing the pattern, the main trick is to have every panel as a "developable surface", so that it can be rolled out flat without distortion.
Download the pattern on the Pattern page.

What you get
- The full pattern as PDF and SVG.
- The FreeCAD file. It's messy, but maybe someone is interested.
- Write-up of the design method.
- Step by step sewing instructions with photos.
Key facts
- Size: about 320 mm wide, 190 mm deep at the belly and 300 mm high at the ends. With the bottle holder it is 418 mm wide.
- Seam allowance: 8 mm on all edges.
- Zippers: waterproof YKK 3C, 317 mm on top and 159 mm for the front pocket.
- Outer fabric: EcoPak EPX200. At 200 g/m² it is quite heavy for a simple bag.
- License: CC BY-NC-SA 4.0
Pages
- From FreeCAD to pattern (design): ellipses, cones and developable surfaces
- Pattern and other downloads: PDF, SVG, FreeCAD file and how to print at the right scale
- Sewing instructions: materials and step by step